Lawrance Ordnance
802 George Street Sydney NSW 2000 Australia
T | 61 2 9212 5673 F | 61 2 9212 6391
E |
lawranceordnance@bigpond.com
LFD 404021238
Mosin Nagant Bolt Disassembly/Assembly
Please select the thumbnails below to view a larger image.
 |
 |
1. Pull the cocking piece slightly to the rear then turn in a clockwise direction to relieve the tension of the firing pin spring.
 |
 |
 |
2. Remove the bolt head and guide by pulling both forward from the bolt body. Note the position of the bolt head and guide as this is important in reassembly.
 |
3. Turn the bolt head in a clockwise direction and remove it from the guide.
 |
4. Place the firing pin onto a soft surface. Gripping the bolt body push down until the bolt body clears the cocking piece. Turn the cocking piece in an anti-clockwise direction until it is free of the firing pin. The bolt is now disassembled.
To reassemble the bolt follow the above steps in reverse order.
